Pelican is a whole-house brand now owned by Pentair. Its lines include carbon filters aimed at chlorine taste and odor, combination systems that add a softener or UV, and NaturSoft salt-free units. Those products do different jobs, and the brand’s marketing claims are not the same as independent test results. This review covers the product lines, what reviewers report, and what to verify before you buy.
Short answer: Pelican can be a reasonable choice if your main concern is chlorine taste and odor, or if you want salt-free scale control. It is not a true water softener. We did not find an independent lab test or Consumer Reports rating of Pelican equipment in the sources we checked, so confirm performance claims against the certification listing for your exact model and the written warranty.
What Pelican sells
- Carbon series (PC600, PC1000): whole-house carbon filters with a sediment pre-filter. Reviewers list them for homes of about one to three bathrooms (PC600) and four to six (PC1000).
- Combo systems (PSE series): carbon filtration plus a NaturSoft salt-free unit, with UV versions for homes on well water. Reviewers report hardware prices from roughly $1,700 upward, before installation.
- NaturSoft units (NS3, NS6): salt-free units based on template-assisted crystallization (TAC).
- Accessories: a shower filter and UV add-on systems.
Model names and prices come from retailer and review pages and change often, so check the current spec sheet.
What the carbon systems do
Pelican’s carbon filters use catalytic carbon. Reviewers describe them as aimed at chlorine, chloramine, and the taste and odor they cause. Reviewers say the carbon units carry NSF/ANSI 42 certification for chlorine taste and odor. They are not presented as NSF/ANSI 53 health-contaminant systems, so do not treat a Pelican carbon unit as a lead or PFAS solution. Our whole-house overview explains the difference between those certifications.
What the NaturSoft units do
NaturSoft uses template-assisted crystallization. It does not remove calcium or magnesium. Both reviews we checked say the same thing: it helps prevent scale on fixtures and heating elements, but the water still tests hard and will not give the slick feel or soap lather of a salt-based softener. This is a conditioner, not a softener. Our saltless systems article covers the category in more detail.
Certifications
Ask for the NSF listing for the exact model. Reviewers cite NSF/ANSI 42, 61, and 372. NSF/ANSI 61 covers materials that contact drinking water, and NSF/ANSI 372 covers lead content in components. One review also cites a German scale-prevention standard (DVGW W512) for the NaturSoft unit. Treat any certification as a claim until you can see the listing.
Price and upkeep
Reviewers describe Pelican as premium priced. One review says Pelican does not list prices on its website, so you will need to call or visit a dealer. Reported costs for whole-house combos run from about $1,700 to $3,400 before installation, and professional installation can add several hundred dollars. Reported upkeep is a pre-filter every 6 to 9 months, carbon media about every 5 years, and UV lamp changes where a UV unit is fitted. Ask for the upkeep schedule in writing with any quote.
Installation
Sources disagree. One review calls the system DIY-friendly for someone with basic plumbing skills. Another says a plumber may be needed. Whole-house installation means cutting into the main line, fitting bypass valves, and checking flow, so most homeowners should plan on a professional. Some warranties require proper installation.
Support and warranty
Reviews report slow warranty handling and difficulty reaching support. Warranty terms are reported to require product registration within a set period and documented maintenance. Read the full warranty before you buy, ask the dealer how claims are handled, and check whether the coverage transfers if you sell the house.
How long it lasts
Part intervals for Pelican’s filters are covered in our lifespan article. The sources do not agree on NaturSoft media life: one review reports a lifetime rating, while general guidance on TAC media is that it often needs replacing after about 5 to 7 years. Check the warranty for the model you are considering.
Who it suits
- You want chlorine taste and odor reduced throughout the house.
- You want salt-free scale control and accept that the water will still test hard.
- You can pay a premium price and arrange a professional installation.
Who should look elsewhere
- You want soft-water feel and soap savings. A salt-based softener is the better fit.
- You need lead, nitrate, or PFAS reduction. Consider certified reverse osmosis at the kitchen sink. Ion exchange vs reverse osmosis compares the options.
- Your water has high iron. Test and pretreat first.
Checklist before you buy
- Get the NSF listing for the exact model and its certification number.
- Ask for the full warranty in writing, including any registration deadline.
- Get a written quote that includes installation, upkeep, and cartridge prices.
- Test your water for hardness and iron. The testing guide explains how.
- Confirm that the unit’s rated flow covers your peak water use.
Frequently asked questions
Is Pelican a good water softener?
Pelican is mainly a filtration brand, and its salt-free NaturSoft option is conditioning rather than true softening. It can suit chlorine and scale problems. If you want soft water, a salt-based softener is the better fit. See our best home water softener guide.
Does Pelican have consumer reports?
We did not find an independent lab test or Consumer Reports rating of Pelican equipment in the sources we checked. Reviews on affiliate and retailer sites are not independent testing.
How much does a Pelican system cost?
Reviewers report whole-house combo systems from about $1,700 to $3,400 before installation. Prices change, so get a written quote.