Reverse Osmosis

Reverse Osmosis Water Treatment: How It Works and Its Pros and Cons

How reverse osmosis works in a home system, what it removes and misses, its main advantages and drawbacks, and how it compares with ordinary filtration.

On this page
  1. Short answer
  2. How reverse osmosis works
  3. What reverse osmosis removes
  4. What reverse osmosis does not remove
  5. Advantages of reverse osmosis
  6. Drawbacks of reverse osmosis
  7. Is reverse osmosis similar to filtration?
  8. Is RO right for your home?
  9. Maintenance
  10. Keep reading

Short answer

Reverse osmosis (RO) is a home water treatment method that pushes water through a very fine membrane under pressure. It removes most dissolved salts and many contaminants, including lead and arsenic, and it can reduce nitrate and fluoride depending on the system. Its main drawbacks are wastewater, the removal of minerals that many people expect in drinking water, and the upkeep of its filters. Whether it is worth it depends on what is in your water, which you can learn from a test.

How reverse osmosis works

Household water pressure pushes water through a semipermeable membrane. The membrane lets water molecules pass but holds back most dissolved salts and larger particles. The held-back material goes out to the drain as reject water, and the water that passes through is the product water you drink.

Reverse osmosis is the reverse of the natural process of osmosis, in which water moves on its own from the side with fewer dissolved particles to the side with more. For a plain explanation of that difference, see osmosis and reverse osmosis.

The stages in a typical home system

A common under-sink system has several stages:

  1. Sediment prefilter. It catches sand, rust, and other particles to protect the membrane. Our guide to the sediment prefilter explains it in more detail.
  2. Carbon prefilter. It removes chlorine and some organic compounds. This matters because chlorine damages the thin-film membranes used in most home systems.
  3. RO membrane. It removes most dissolved salts and many other contaminants.
  4. Post-carbon filter. It polishes taste and removes remaining odors. See what the post-carbon filter does.
  5. Storage tank (in many systems). Under-sink systems produce water slowly, so many store it in a small tank and then dispense it at the faucet.
  6. Optional remineralization stage. Some systems add calcium or magnesium back. See remineralizing RO water.

Feed pressure matters. Most manufacturers specify a minimum water pressure that the system needs to work well. Check your model’s specification. Our article on RO feed pressure covers this in detail.

What reverse osmosis removes

  • Dissolved salts (total dissolved solids, or TDS). RO is among the most effective home methods for reducing TDS. Results depend on the membrane and on how well the system is maintained.
  • Many metals, including lead and arsenic. Certified systems state which metals they are tested to reduce.
  • Nitrate and fluoride, to a significant degree in many systems. Check the certification for the specific contaminant you care about.
  • Many microorganisms, when the membrane is intact. RO is not a substitute for disinfection when water is known to be microbially unsafe.

Look for certification to NSF/ANSI standards, which the manufacturer should list. The certification states what was tested and how it performed.

What reverse osmosis does not remove

  • Chlorine and some organic compounds are mainly handled by the carbon prefilter and the post-carbon filter, not by the membrane alone.
  • Some dissolved gases, such as carbon dioxide. This is one reason RO water can be slightly acidic. See whether RO water is acidic.
  • Minerals you may want. Calcium and magnesium are removed along with the contaminants. Many people add them back, and food is the main source of both.

Advantages of reverse osmosis

  • Strong reduction of dissolved salts and many contaminants, when the system is certified and maintained.
  • Good taste and odor, because the carbon stages remove chlorine and the membrane removes many dissolved compounds.
  • No electricity needed in most designs, because it runs on household water pressure. Some systems add a booster pump.
  • Compact and convenient. An under-sink system gives you filtered water at a dedicated faucet, without bottles or refills.
  • Lower cost than buying bottled water regularly. The filters and the membrane are a running cost, but they are usually cheaper than the same volume in bottles. Compare your own numbers.

Drawbacks of reverse osmosis

  • Wastewater. Most standard residential systems send more than one gallon of reject water to the drain for each gallon they produce. The ratio varies by model. See how much water an RO system wastes.
  • Flat taste. Removing minerals often makes the water taste flat, which is why some people remineralize it.
  • Slow production. Under-sink units produce water gradually, so most keep a storage tank.
  • Upkeep. Prefilters need changing about every 6 to 12 months, and the membrane every few years. Skipping filter changes can reduce the membrane’s life.
  • Pressure dependence. Low water pressure can slow or stop a system.
  • Cost of the system. The upfront cost and the replacement filters add up. Weigh them against bottled water or other treatment options.

Is reverse osmosis similar to filtration?

Yes, in one important way. RO is a form of membrane filtration: water passes through a barrier that catches some of what is in it. Ordinary filters use a coarser barrier, such as sediment or carbon media, and they mainly catch particles and chemicals that the media can adsorb. The RO membrane is far finer, so it also catches dissolved salts that ordinary filters pass through.

In practice, the two are often used together. A sediment or carbon prefilter protects the membrane, and the membrane then removes what the prefilters cannot. So RO is best thought of as a finer step in a filtration chain, not a separate kind of water treatment that replaces filtration.

Is RO right for your home?

RO is a good fit when your water has dissolved salts, metals, or nitrate that you want to reduce, and when you are willing to maintain the system. It is less useful if your main concern is chlorine taste alone, because a carbon filter costs less and needs less upkeep. It is also not a complete answer to microbial contamination.

The first step is a water test. A test tells you which contaminants are present and at what levels, and that will narrow the choice more than any general comparison.

If you are comparing RO with carbon systems, our article on solid carbon block vs reverse osmosis covers the trade-offs.

Maintenance

  • Prefilters: replace on the manufacturer’s schedule, often every 6 to 12 months. See the sediment prefilter.
  • Membrane: replace every few years, depending on your water and use. See how often to replace an RO membrane.
  • Post-carbon filter: replace on schedule to keep taste and odor reliable.
  • Storage tank: check the pressure in the tank if your system has one, and follow the manual’s instructions.
  • Troubleshooting: if the system stops producing water or the lights show a fault, see reverse osmosis troubleshooting.

Keep reading

Keep exploring

Guides from other topics

All topics →