Some home water filters do remove chloramine, but not all of them. Chloramine is a compound of chlorine and ammonia that many utilities use because it stays in the water longer in the pipes. It is more stable than free chlorine, so the carbon that handles chlorine well often handles chloramine less well. A filter has to be designed and tested for chloramine, and it has to run at a flow rate and contact time that allows the reaction to happen. Boiling does not remove chloramine in any practical way.
Find out whether your water has chloramine
Your utility’s annual Consumer Confidence Report states the disinfectant the utility uses. If it says chloramine, or “chloramines,” your water contains it. If the report says chlorine, you have free chlorine, which is easier to remove.
Utilities often switch disinfectants seasonally or during maintenance, so the report is the best check, and it is worth looking at again each year. A DPD test kit can also help. It measures free chlorine and total chlorine, and a large gap between the two suggests chloramine. Consumer test kits are not always precise, so treat the result as a rough guide.
Why chloramine is harder to remove
Free chlorine is reactive, and standard activated carbon captures it fairly easily. Chloramine is more stable. It needs more contact time with the carbon to break down, so a standard carbon filter running at a fast flow may remove only part of it. A filter that works well on chlorine taste can still leave a noticeable amount of chloramine if its carbon is too small, its flow is too fast, or its media is worn.
Filters that can reduce chloramine
Carbon block with a chloramine claim. A dense carbon block, tested and certified for chloramine reduction, is a common choice for under-sink and countertop units. The listing should name chloramine and state the test conditions. Some carbon block cartridges carry chloramine claims under NSF/ANSI 42 or 53.
Catalytic carbon. Catalytic carbon has been modified to have more active sites on its surface. It can break down chloramine faster than standard carbon and needs less contact time, which makes it useful for faster flow rates. It is a common choice in whole-house systems for chloramine-treated water.
KDF with catalytic carbon. KDF is a copper-zinc media that reduces free chlorine and extends the life of the carbon. On its own, KDF removes only a limited amount of chloramine. In a system built for chloramine, it is usually paired with catalytic carbon.
Reverse osmosis. RO can reduce chloramine. The membrane itself does not handle chloramine reliably, so the carbon pre-filter in the RO system does most of the work. Check that the carbon pre-filter is designed for chloramine, and keep it on schedule. RO also sends some water to drain.
What does not work
- Boiling does not remove chloramine in any practical way. A small amount may be driven off, but not enough to make the water chloramine-free.
- Letting water stand does not work, because chloramine stays in the water for a long time. The off-gassing method that works for free chlorine does not work for chloramine.
- A filter with only a general chlorine claim may not reduce chloramine enough. Look for a named chloramine claim.
- Vitamin C neutralises chloramine, but it is a chemical treatment for specific uses such as aquariums, brewing or a bath filter. It is not a practical method for daily drinking water.
Check the listing
When you read a listing for chloramine, look for:
- The named chloramine claim, not only a chlorine claim.
- The standard it is certified under, such as NSF/ANSI 42 or 53.
- The flow rate at which the claim was tested, and the rated capacity.
- The model number and the matching replacement cartridge.
If the listing covers chlorine but does not name chloramine, do not assume that it covers chloramine. Our article on NSF certifications explains how to check a claim on the official listing.
Replacement and flow
Chloramine uses up carbon faster than chlorine does, so a filter that is used on a chloramine supply needs replacing on schedule, and sometimes sooner than the chlorine-only rating suggests. Check the rated capacity for chloramine specifically. A cartridge that is past its life may reduce chlorine taste while passing more chloramine than it should.
Keep the flow rate in mind as well. A slow flow gives the carbon more contact time. A fast-flowing system, such as a high-flow whole-house unit or a fast faucet filter, may need a larger carbon volume to reach the same reduction.
Pets and aquariums
Chloramine is toxic to fish and to some amphibians and reptiles, and it can harm the beneficial bacteria in an aquarium. A home filter for drinking water is not designed for aquarium use. For an aquarium, use a dechlorinator product made for fish that neutralises chloramine. Follow the product instructions, and test the water if you can.
Bottom line
A filter can remove chloramine, but only one that has a named chloramine claim, is designed for chloramine, and is replaced on schedule. Check your utility’s report to confirm whether your water contains chloramine, and read the listing rather than the packaging. Boiling does not solve the problem.
Our article on removing chlorine from tap water at home covers the chlorine methods in more detail. For the replacement timing, see how often to change a home water filter, and for the filter types, see types of home water filters.