Well Water

How to Filter Well and Bore Water for Drinking

Test first, then match filters to what is in your water: sediment, iron, hardness, nitrate and bacteria. A practical guide to filtering well and bore water.

On this page
  1. Start with a water test
  2. Match the treatment to the problem
  3. Sediment comes first
  4. Iron, manganese and sulfur
  5. Hardness and water softeners
  6. Nitrate needs reverse osmosis or anion exchange
  7. Bacteria: disinfect after filtering
  8. Slow sand filters: a DIY option with limits
  9. Point-of-entry or point-of-use
  10. Look for certification
  11. Costs and upkeep
  12. When boiling is enough and when it is not
  13. Next steps

Start with a water test

A private well is not checked by a utility, so testing falls to you. Before you buy any equipment, send a sample to an accredited laboratory. State health departments and university extension programs can usually point you to one.

At minimum, plan on testing once a year for total coliform bacteria, E. coli and nitrate. Add other tests based on your area and on what you notice: pH, hardness, iron, manganese, hydrogen sulfide (the rotten egg smell) and total dissolved solids (TDS). In some regions, arsenic, lead, uranium, radon or local pesticides are also worth testing for.

One lab report tells you what to treat. Without one, it is easy to spend money on equipment that solves the wrong problem. To understand what a bacteria result means for drinking, read how to tell if bore water is safe to drink.

Match the treatment to the problem

Treat water in stages, not with a single device. Each stage protects the one after it. The table below shows the usual first step for each common problem.

What the test or your taps show Usual treatment Read more
Sand, mud, silt or cloudy water Sediment filter as the first stage Borewell mud and silt filters
Orange or brown iron staining Oxidizing filter or iron-removal media Iron filters for well water
Black stains or a bitter taste Oxidation and filtration for manganese Removing manganese from well water
Rotten egg smell Find the source, then oxidizing or carbon treatment Getting rid of rotten egg smell
Scale, or soap that will not lather Ion-exchange water softener See the softener section below
Nitrate above the health limit Reverse osmosis or anion exchange Removing nitrates from well water
Bacteria or viruses Disinfection with UV or chlorine; shock chlorination for a one-time problem Shock chlorinating a well

Acidic (low pH) water can corrode pipes. It may need a neutralizer as a stage of its own, placed where the lab results direct.

Sediment comes first

Sediment filters protect everything downstream. Sand and silt can wear pump parts, clog reverse osmosis membranes and fill cartridges quickly. A sediment stage is usually the first piece of equipment in the line, ahead of softeners, carbon, reverse osmosis and disinfection.

Cartridge filters are simple and cheap, but they clog fast on heavy sediment. Backwash sand or multimedia filters handle heavy loads better and need a drain line. For details on micron ratings and choosing between them, see borewell mud and silt filters.

Iron, manganese and sulfur

Iron, manganese and hydrogen sulfide often appear together in well water. Iron causes orange stains and manganese causes black stains. Hydrogen sulfide causes the rotten egg smell. Each one reacts with oxygen or chlorine, which is why oxidizing filters are common. Whether a standard water softener is enough depends on the level, so test before you decide.

The EPA’s secondary guideline for iron is 0.3 mg/L, and for manganese it is 0.05 mg/L. Both are aesthetic guidelines, meaning they relate to taste, staining and appearance rather than direct health risk. Hydrogen sulfide is mainly an odor and corrosion problem in water, but the gas itself is hazardous in enclosed spaces such as well pits.

For specifics, read iron filters for well water, removing manganese from well water and getting rid of rotten egg smell.

Hardness and water softeners

Softeners exchange calcium and magnesium for sodium or potassium. They reduce scale and soap use, and they can help with some iron. They do not remove bacteria, nitrate or most chemicals.

Softened water contains added sodium. If you are on a sodium-restricted diet, ask your doctor whether to keep an unsoftened tap for drinking and cooking. Softeners also need salt. Check your owner’s manual for the type of salt your unit needs. For Kinetico owners, see where to buy Kinetico salt.

Nitrate needs reverse osmosis or anion exchange

Nitrate is colorless, odorless and tasteless, so you cannot detect it by taste. Standard cation softeners do not remove it. Reverse osmosis (RO) at the kitchen tap removes most nitrate, and anion exchange can treat the whole house. Boiling does not help, because it concentrates nitrate as water evaporates. Read how to remove nitrates from well water for the details.

Bacteria: disinfect after filtering

Filtration does not reliably remove all bacteria and viruses. Disinfection is a separate step.

  • UV disinfection works well on clear water, so sediment and iron should be removed before it. UV leaves no disinfectant in your pipes, so it protects only the water that passes through it.
  • Chlorination leaves a residual that protects the plumbing downstream. It needs dosing equipment and a contact time, and it adds a chlorine taste.

For a well that has tested positive for bacteria once, shock chlorination can clean the well and plumbing. It is a temporary measure, and the source needs to be checked if the problem returns. See how to shock chlorinate a well.

Slow sand filters: a DIY option with limits

Slow sand filters use a living layer of bacteria on the sand surface to trap and break down many pathogens. They can be built from simple materials, but they are slow, sensitive to cold and need careful operation. They do not reliably remove dissolved chemicals, nitrate or many viruses, so the water still needs testing and disinfection afterward. For design basics, see how to design a slow sand filter.

Point-of-entry or point-of-use

  • Point-of-entry (whole-house) systems treat all water as it enters the home. Sediment, iron, hardness and disinfection are usually whole-house jobs.
  • Point-of-use systems, such as under-sink reverse osmosis, treat only the tap you drink from or cook with.

A common approach is a whole-house sediment and iron stage, with an under-sink RO unit at the kitchen tap for drinking water. Reverse osmosis wastes some water and needs a pre-filter, so it is best suited to small volumes.

Look for certification

Certification marks help you check a claim. Look for NSF/ANSI or WQA certification that matches the contaminant the product claims to reduce. For example, NSF/ANSI 58 covers reverse osmosis systems, NSF/ANSI 53 covers health-related contaminant reduction, and NSF/ANSI 55 covers UV systems. Check the certificate on the manufacturer’s site, not just the logo on the box.

Costs and upkeep

Whole-house systems cost far more than a single under-sink filter, and they add ongoing costs for cartridges, media, salt and, for UV, lamps. Get quotes that list the equipment, installation and expected replacement schedule. For price ranges by system type, see well water filtration system cost.

When boiling is enough and when it is not

Boiling kills bacteria and viruses. Bring water to a rolling boil for one minute, or three minutes at high elevations. Boiling does not remove nitrate, metals, salts or most chemicals, and it can make some of them more concentrated. Boiling is a short-term fix while you arrange proper treatment, not a substitute for it. For households with infants or anyone at higher risk, see how to tell if bore water is safe to drink.

Next steps

  1. Get a complete lab test from an accredited lab.
  2. Write down the results and any problems you notice.
  3. Choose a sediment stage first, then the treatment that matches each result.
  4. Add disinfection, and retest the water after installation.
  5. Schedule filter changes, and retest every year.

For help planning a treatment order for bore water, read how to purify bore water for drinking.

Keep exploring

Guides from other topics

All topics →