Water Treatment Basics

How to Filter Lead Out of Drinking Water: Which Filters Work

Lead cannot be seen or tasted, so test first. Learn which filters reduce lead, how NSF/ANSI 53 and 58 apply, and what to do in the meantime.

On this page
  1. How lead gets into tap water
  2. Test before you filter
  3. Filters that reduce lead
  4. What does not work
  5. Everyday steps while you sort it out
  6. Lead service lines and long-term fixes
  7. Who is most at risk
  8. Keeping a filter working
  9. Check the listing before you buy

Lead in drinking water cannot be seen, tasted or smelled, so the first step is always a test. Once you know the level, you can choose a filter that is certified to reduce lead. The filters that work are certified for it under NSF/ANSI 53, or are reverse osmosis (RO) systems certified under NSF/ANSI 58. Standard taste-and-odour filters do not remove lead. Boiling does not remove it, and it can make the water more concentrated.

Lead is a serious concern for young children and for pregnant people, so the advice here is cautious. If someone in your household may have been exposed, talk to a doctor about a blood lead test.

How lead gets into tap water

Lead usually enters water from plumbing rather than from the water supply itself. Lead service lines, which connect the home to the water main, are one source. Older solder, brass fittings and fixtures can also release lead, particularly when water sits in the pipes for hours. Utilities treat their water to limit corrosion of these materials, but they cannot remove lead that comes from a home’s own plumbing.

Lead service lines are common in older housing. Many utilities keep an inventory of their lead service lines, and you can ask for that information for your address.

Test before you filter

A test tells you whether lead is present and at what level. Use a state-certified or accredited laboratory for a reliable result. Ask the lab for a first-draw sample, taken after the water has sat in the pipes for several hours, and a flushed sample, taken after running the tap. The difference between the two can point to where the lead is coming from.

Your utility may also test for lead as part of its compliance monitoring. The results are not the same as a test of your own tap, so ask the utility what it tested and where.

Filters that reduce lead

Certified reverse osmosis. An under-sink or countertop RO system certified to NSF/ANSI 58 with a lead-reduction claim is one of the most effective options for drinking water. Check that the claim covers lead for the exact model, not just the standard.

Carbon and ion-exchange filters with a lead claim. Some carbon block and ion-exchange cartridges are certified under NSF/ANSI 53 for lead reduction. The NSF/ANSI 53 lead test requires the filter to reduce lead from 150 micrograms per litre to 10 micrograms per litre or less. That is the standard to look for on a listing.

Pitchers and faucet filters. Some pitchers and faucet filters are certified for lead, and some are not. Read the listing for the specific model. A “NSF certified” badge without a named lead claim does not show that the filter reduces lead.

Distillation. A home distiller removes lead, but the process is slow, so it is generally used for small volumes of drinking water.

What does not work

  • Boiling does not remove lead. Water loses volume as it boils, so the lead concentration can go up.
  • Standard carbon filters sold for chlorine and taste do not remove lead unless they carry a lead claim.
  • Water softeners do not reduce lead as a treatment step.
  • Copper pipes do not remove lead from water. Replacing lead pipes with copper or plastic prevents lead from entering the water, but it does not filter the water that is already there.

Everyday steps while you sort it out

These steps reduce exposure while you test and decide on a fix.

  • Use cold water for drinking, cooking and infant formula. Hot water can dissolve more lead from plumbing than cold water.
  • Flush the tap before use. If the water has sat in the pipes for several hours, run the cold tap until it runs noticeably colder or for a set time that your utility or health department recommends. Use that water for cleaning, not drinking, if you are unsure.
  • Clean faucet aerators on a regular schedule. Particles can collect in the screen.
  • Use bottled water for drinking and formula while you wait for a fix, if your test shows a high level or you know there is a lead service line.

Advice on flushing times varies between utilities and health departments, so follow the guidance for your area.

Lead service lines and long-term fixes

A filter treats the water at one tap or in the house. A long-term fix involves the source of the lead. If your home has a lead service line, ask the utility about replacement options, and ask whether it has a programme that covers the cost. Replacing lead plumbing inside the home is also a long-term fix. A licensed plumber can identify fittings and pipes that contain lead.

Who is most at risk

Young children are most at risk from lead exposure, because their bodies absorb more of it and their brains are still developing. Pregnant people and infants who drink formula made with tap water are also priority groups. If anyone in these groups may have been exposed, ask a doctor about a blood lead test. Do not rely on a filter alone for these groups until the level is known.

Keeping a filter working

Lead filters lose capacity over time. Replace the cartridge or membrane on the schedule in the listing, whichever of time or volume comes first. A filter that is overdue can stop reducing lead while still looking normal. Our article on how often to change a home water filter explains the usual intervals and warning signs.

Check the listing before you buy

  • The NSF/ANSI standard and the named lead claim for the exact model.
  • The test conditions and the influent level used in the test.
  • The rated capacity or service life for the lead claim, which may be shorter than for other claims.
  • The replacement cartridge model, which must match the listing.

Our article on NSF certifications explains how to read these claims in more detail. For an overview of the filter types, see types of home water filters.

The complete guide to water treatment basics

Types of Home Water Filters and Treatment Systems Compared
Read the guide

Keep exploring

Guides from other topics

All topics →