The short answer
Most refrigerator manufacturers suggest changing the water filter about every six months. That is a starting point. Heavy use, such as filling bottles, making a lot of ice, or using the dispenser many times a day, can mean a sooner change. Your model’s manual has the exact interval, and it is the best guide for your fridge.
What shortens or lengthens the schedule
The six-month guidance assumes typical household use. Your schedule changes with how much water passes through the filter. A family that fills bottles, makes ice often, or uses the dispenser several times a day may need a new filter sooner. A household that rarely uses the dispenser may go longer, though most manufacturers still recommend a change within the stated interval.
Water quality matters too. If your tap water has more sediment or chlorine, the filter can load up faster. Check your water report and your fridge manual together.
Signs the filter is due
Watch for these signs, which often show up before the light does:
- water from the dispenser flows more slowly than usual
- the water has a chlorine taste or an unpleasant odor
- ice is smaller than normal, cloudy, or has an off taste
- the filter light is on or flashing
- it has been six months or more since the last change
If the light is on but the water tastes and flows normally, the filter may still be fine. Check the manual, because some models trigger the light on time alone.
Reading the filter light
The filter light on many fridges is a time-based reminder, not a sensor. Some models track the days since the last change. Others measure water use. Either way, the light tells you when the manufacturer thinks the filter should be changed, not what condition it is in.
Reset the light after you install a new filter. The method differs by model. Some use a dedicated reset button, and others require holding a button for several seconds. The manual has the steps.
Genuine vs compatible filters
Use a filter made for your refrigerator model. Manufacturer filters are designed for the fridge’s housing and water system. Compatible filters can cost less, and a good one can work well, but only if it is certified to the relevant standard and made for your model. A poorly made cartridge may not seal, may restrict flow, or may not do what the box claims.
If a filter does not fit easily, do not force it. Check the part number before you try again. Forcing a plastic housing can crack it.
What a new filter does not fix
A new filter helps taste and flow, but it does not fix every refrigerator water problem. It will not fix a frozen water line, a failing inlet valve, low household water pressure, or a broken ice maker. If the flow stays weak after a proper change and flush, check that the supply valve behind the fridge is fully open and that the supply line is not kinked. If the problem continues, a technician can find the cause.
Water pooling under the filter is a reason to stop. A loose filter may simply need to be reseated, but a cracked housing or worn seal needs repair. Do not keep using a leaking water system.
A simple reminder system
Write the install date on each filter with a marker, and set a calendar reminder for six months out or the interval in your manual, whichever is shorter. Keep the light as a second reminder, not the only one. If your household depends heavily on fridge water and ice, keep an approved spare filter on hand.
For the step-by-step swap, see how to install a Frigidaire PureSource Ultra refrigerator water filter. For how fridge filters compare with dedicated under-sink or countertop systems, see drinking water filtration systems compared.