Water Treatment Basics

NSF 42, 53 and 58: What Water Filter Certifications Mean

NSF 42 covers taste and chlorine, NSF 53 covers health contaminants like lead, and NSF 58 covers reverse osmosis. Learn how to check a claim.

On this page
  1. What the numbers mean
  2. NSF/ANSI 42: taste, odour and chlorine
  3. NSF/ANSI 53: health contaminants
  4. NSF/ANSI 58: reverse osmosis
  5. Other NSF standards you may see
  6. How to check a claim
  7. Why some good filters are not certified
  8. Quick comparison
  9. Bottom line

NSF International develops and runs independent certification for home water treatment products. The numbers on a filter’s packaging refer to specific NSF/ANSI standards, and each standard tests a different set of claims. NSF 42 covers taste, odour and chlorine. NSF 53 covers health-related contaminants such as lead. NSF 58 covers reverse osmosis systems. A filter can carry one of these certifications and not the others, and a certified badge does not mean the product removes everything.

What the numbers mean

The numbers are not a ranking. They reflect the order in which the standards were developed, not how good a filter is. A higher number is not better than a lower one; it covers different claims. What matters is which claim the filter is certified for and whether that claim matches your concern.

NSF/ANSI 42: taste, odour and chlorine

NSF/ANSI 42 is the standard for aesthetic effects. It tests whether a filter reduces chlorine taste and odour, and it can also cover particle reduction and some other aesthetic claims. Many carbon pitchers, faucet filters and under-sink carbon units carry this certification.

NSF 42 does not test for health-related contaminants such as lead, arsenic or PFAS. A filter certified only to NSF 42 improves taste and odour, but it has not been verified for those contaminants. If chloramine is a concern, check for a separate chloramine claim, because it is not always included.

NSF/ANSI 53: health contaminants

NSF/ANSI 53 covers health-related contaminants. Filters are certified for specific contaminants, and each claim is listed separately. Common claims include lead, cysts such as Giardia and Cryptosporidium, volatile organic compounds (VOCs), mercury, asbestos, and PFOA and PFOS for some systems.

The lead test is a useful example of how a claim is measured. To earn the lead claim, a filter must reduce lead from 150 micrograms per litre in the test water to 10 micrograms per litre or less. That is the threshold a listing refers to when it says it reduces lead.

Because the claims are separate, a filter can be certified for lead and not for cysts, or the reverse. Check the listing for the exact claim you need.

NSF/ANSI 58: reverse osmosis

NSF/ANSI 58 is the standard for reverse osmosis systems. It tests the RO system against a set of contaminant claims, which can include some of the same contaminants as NSF 53, such as lead, along with others depending on the listing. An NSF 58 listing tells you the system has been tested as a reverse osmosis unit, but the specific reduction claims are listed separately.

RO systems can also be certified for PFOA and PFOS claims under NSF 58, and for total PFAS claims in some cases. These are model-specific, so check the listing for the exact system you are considering.

Other NSF standards you may see

  • NSF/ANSI 44 covers cation exchange water softeners, for reducing hardness. It does not cover safety claims.
  • NSF/ANSI 55 covers ultraviolet systems. Class A is for microbiological claims, and Class B is for supplemental treatment. Check which class applies.
  • NSF/ANSI 401 covers emerging contaminants, including some pharmaceuticals and pesticides. It tests a defined list of named compounds.
  • NSF/ANSI 61 covers materials in contact with drinking water, such as components and cartridge housings. It is a safety standard for materials, not a claim about contaminant reduction.

How to check a claim

A badge on the box is not enough. To check a claim:

  1. Use the official NSF listings. NSF maintains a free online database of certified products. Search by brand, model or contaminant.
  2. Find the exact model. Replacement cartridges can differ between models, and the certification applies to the complete system or the specific cartridge listed. Confirm which one is covered.
  3. Read the named claim. Look for the specific contaminant, such as “lead reduction” or “chlorine reduction,” rather than a general NSF mark.
  4. Check the performance data sheet. It gives the conditions behind the claim, including flow rate, capacity and when the cartridge should be replaced.
  5. Check the date. Certification is maintained over time, so the current listing matters.

If the exact model and the exact claim are not both listed, do not treat the claim as verified for your situation.

Why some good filters are not certified

Certification costs money and takes time, and small manufacturers may not certify every product. An uncertified filter is not necessarily poor, and some have independent lab tests behind them. But without a named certification or a published test, you have no independent check of what the filter does. For health-related contaminants, certification is the easiest way to verify a claim.

Quick comparison

Standard What it covers Typical filter type
NSF/ANSI 42 Chlorine taste and odour, particles Carbon pitcher, faucet, under-sink carbon
NSF/ANSI 53 Health contaminants such as lead, cysts, VOCs, PFOA and PFOS Carbon block, specialty cartridges, some RO
NSF/ANSI 58 Reverse osmosis system claims Under-sink and countertop RO
NSF/ANSI 44 Hardness reduction Water softeners
NSF/ANSI 55 Ultraviolet systems UV disinfection units
NSF/ANSI 401 Emerging contaminants, including some pharmaceuticals Specific RO and carbon systems

Bottom line

Read the specific claim, not the badge. NSF 42 is about taste and chlorine, NSF 53 is about health contaminants, and NSF 58 is about reverse osmosis. Each listing names what was tested. Use the official NSF database to confirm the exact model and claim before you buy.

For the filter types these standards cover, see types of home water filters. For the lead and PFAS claims in particular, see the lead filtering guide and the PFAS guide. The chloramine article explains why chloramine needs its own check.

The complete guide to water treatment basics

Types of Home Water Filters and Treatment Systems Compared
Read the guide

Keep exploring

Guides from other topics

All topics →