The short answer
Most homes with two to four people do well with a standard under-sink tank labeled 3.2 or 4 gallons. Those tanks usually hold about 2 to 3 gallons of usable water. Larger households, or a system that also feeds an ice maker or a fridge, need a bigger tank. The label is only a starting point, because usable capacity is lower than the number on the side.
Why the label overstates what you get
A storage tank has a rubber bladder inside a rigid shell. The air in the bladder is pre-charged to a set pressure, and water fills the space around the bladder. The air takes up part of the tank, so the water you can draw out is less than the total volume.
Tank makers do not use one standard for labeling. Two tanks of the same size may be called different sizes by different brands. Pure Water Products tested four common tanks at 40 psi, which is a typical full-tank pressure on city water. Their results:
- a tank labeled “4 or 3.2 gallon” held about 2.5 gallons
- a tank labeled “3 gallon” held about 1.75 gallons
- a tank labeled “2 gallon” held about 1 gallon
Other sources put typical usable water at about 50% to 70% of the tank’s total volume. Use the usable figure, not the label, when you compare tanks.
Common under-sink sizes and usable water
These ranges are approximate and vary by brand and pressure.
| Label size | Typical usable water | Suits |
|---|---|---|
| 2 gallon | About 1 gallon | Tight spaces, one or two people, low use |
| 3 to 3.2 gallon | About 1.75 to 2.5 gallons | Small households and standard cabinets |
| 4 to 4.5 gallon | About 2.5 to 3 gallons | Average households of three to four people |
| 6 gallon | About 3.5 to 4.5 gallons | Larger households with frequent use |
| 9 to 11 gallon | About 6 to 8 gallons | Large families or systems with extra appliances |
Under-sink tanks are typically 2 to 4 gallons. Larger tanks usually sit beside the cabinet or in a utility space.
Matching a tank to your household
A tank needs to hold enough water for drinking and cooking between refills. Think about how much RO water you draw in a typical hour, not the whole day. For most households, the main limit is how fast the RO unit refills the tank, not the tank itself. A tank that empties during a busy cooking session will refill before the next morning.
Ask yourself three questions:
- How many people use the RO water for drinking and cooking?
- Is the RO line connected only to the kitchen faucet, or also to a fridge or an ice maker?
- How much space do you have under the sink, and where else can a larger tank sit?
Ice makers, fridges, and other appliances
If you connect the RO system to a refrigerator or ice maker, the tank will be drawn on more often. A larger tank can help, but the RO unit’s production rate matters too. Check the rated gallons per day, and ask the manufacturer whether the system is rated for the added appliance.
If you are tying in an ice maker, make sure the appliance is designed for RO water and that the connection meets local plumbing rules.
Checking and setting the tank pre-charge
The tank’s air pre-charge matters for how much water it holds and how it delivers. Many manufacturers call for about 5 to 7 psi with the tank empty. Check the figure in your manual. To check, drain the tank by closing the feed water valve and opening the faucet until the flow stops. Then use a tire gauge on the air valve, which is usually under a cap at the base of the tank. Add air with a bicycle pump if the reading is low.
Check the pre-charge at installation and after a year or so. A tank with too little air can deliver less water, and one with too much air can also affect delivery. If output stays low after the pre-charge is right, see reverse osmosis troubleshooting.
When to consider a larger tank or a tankless unit
Consider a larger tank if the household is large, if the RO water feeds several appliances, or if the cabinet can take a bigger tank without crowding the pipes. Consider a tankless unit if you want on-demand water and have the space and power for the unit. For a closer look at the trade-offs, see tankless vs tank reverse osmosis: which should you buy?.
For installation details, see how to install an under-sink reverse osmosis system. For the overall choice of system type, see drinking water filtration systems compared.