Well Water

How to Remove Manganese From Well Water

Manganese in well water causes black stains and bitter taste. Learn the 0.05 mg/L guideline, how to test, and which oxidizing or greensand filters remove it.

On this page
  1. Short answer
  2. Why manganese matters
  3. Test before you buy
  4. Treatment methods
  5. Check the pH
  6. Match the treatment to the result
  7. Maintenance
  8. Cleaning up stains

Short answer

Manganese in well water is removed by oxidizing it into a solid, then filtering out the solid. The usual methods are air-injection oxidizing (AIO) filters, manganese greensand, Birm-type media, or a chlorine or permanganate feed followed by a filter. A water softener can remove low levels, but it is not a reliable fix for higher levels. Test first, so you know the manganese level and the iron level, since they usually occur together.

Why manganese matters

Manganese stains laundry, fixtures and toilets, often black or brown. It also gives water a bitter or metallic taste. The EPA’s secondary guideline for manganese is 0.05 mg/L. That guideline is aesthetic, meaning it is set for taste and staining rather than direct health risk. The EPA also issues a health advisory for manganese in drinking water, which is separate from the secondary guideline. Ask your lab or local health department which limit applies to your situation.

Test before you buy

A certified laboratory test gives the manganese level, the iron level and the pH. Home test kits are less precise and may not measure total manganese. Ask the lab for total manganese and total iron, and report the pH too, because pH affects which treatment works.

Testing also clarifies whether the manganese is dissolved or already oxidized into particles. Dissolved manganese is invisible in the water and oxidizes later, so stains appear after the water has been exposed to air. Particulate manganese is already solid and can be removed by filtration alone.

Treatment methods

  • Air-injection oxidizing (AIO) filters. These inject air into a tank so dissolved manganese oxidizes into a solid. Catalytic media traps the solids, and the filter is backwashed to flush them out. AIO filters handle higher levels well.
  • Manganese greensand. Greensand media is coated with manganese dioxide, which oxidizes dissolved manganese and traps the solids. It needs regular regeneration with potassium permanganate.
  • Birm and similar media. These rely on dissolved oxygen and a suitable pH to oxidize manganese. Check the manufacturer’s pH requirements before choosing this option.
  • Chlorination or permanganate feed, then filtration. A chlorine, hydrogen peroxide or potassium permanganate feed oxidizes dissolved manganese. A multimedia or sand and anthracite filter then removes the solids. A small chlorine residual can help keep catalytic media clean.
  • Water softener. A standard cation softener can remove low levels of dissolved manganese. At higher levels, the manganese can precipitate and foul the resin. Use a softener for low levels only, after checking the manufacturer’s limits.
  • Reverse osmosis. RO at the kitchen tap is useful for drinking water, but it is not usually a whole-house solution for manganese.

Check the pH

Many oxidation and filtration processes work best within a specific pH range. Acidic water may need a neutralizer ahead of the filter. Confirm the pH target for the media you choose, and retest after any change.

Match the treatment to the result

Result Usual approach
Low dissolved manganese, no other problems Water softener, if within its limit, or RO at the drinking tap
Dissolved manganese, moderate level Oxidizing filter such as AIO or greensand
Manganese and iron together Oxidation and filtration, often with a media that handles both
Manganese with high pH or acidic water Adjust pH first, then oxidize and filter

Maintenance

  • Backwash oxidizing filters on the manufacturer’s schedule.
  • Regenerate greensand with permanganate as directed.
  • Replace media when it stops performing, usually after several years.
  • Keep a chlorine or permanganate feed topped up if the system uses one.
  • Retest the water after service.

Cleaning up stains

Existing manganese stains are hard to remove with ordinary cleaners. Once the water is treated, stains usually fade with use of the treated water, but stubborn marks may need a specialist cleaner. Test the cleaner on a small area first.

For the full treatment order, including sediment and disinfection, see how to filter well and bore water for drinking. Manganese often appears with iron, so also read iron filters for well water.

The complete guide to well water

How to Filter Well and Bore Water for Drinking
Read the guide

Keep exploring

Guides from other topics

All topics →