Well Water

Well Water Filtration System Cost

What well water filtration costs, from sediment filters to whole-house iron, softener and RO systems, plus installation and upkeep.

On this page
  1. What drives the price
  2. Typical price ranges
  3. Testing costs less than guessing
  4. Ongoing costs
  5. Ways to keep the budget reasonable
  6. Questions to ask before you sign

What drives the price

Three things set the cost of a well water filtration system more than any other:

  • What the water needs. Sediment alone is cheap. Iron, hardness, nitrate or bacteria add stages, and each stage adds equipment and upkeep.
  • Where it goes. A whole-house system treats every tap, so it needs a larger, more expensive unit than an under-sink filter that serves one faucet.
  • Flow rate. A household that runs several showers and appliances at once needs a unit sized for peak flow, not just average use.

Installation labor, plumbing changes, electrical work for pumps or UV lamps, and permits can add a large share to the total.

Typical price ranges

The figures below come from published installer cost guides and are rough. Prices vary a lot by region, brand, flow rate and installer, so treat them as a starting point and compare local quotes.

System Rough installed range (USD)
Under-sink reverse osmosis (drinking water) about $200 to $600
Whole-house sediment or cartridge filter a few hundred dollars for equipment
Whole-house water softener about $800 to $2,000
Whole-house well system (iron, sediment and softening combined) about $1,000 to $5,000 or more
Whole-house reverse osmosis several thousand dollars

Installer guides also cite labor of roughly $100 to $500, depending on the job. Check whether a quote includes labor, permits and parts.

Testing costs less than guessing

A lab test usually costs far less than the equipment it helps you choose. Fees vary by state and by lab. Many state health departments and university extension programs offer testing at low cost, so check those options before paying a private lab. Without test results, an installer may quote the most expensive package to be safe. A good installer will ask for your results first.

Ongoing costs

Plan for recurring costs as well as the purchase price:

  • Cartridges and media. Sediment cartridges need regular replacement. Backwash media lasts years but still needs periodic replacement.
  • Salt. Softeners need salt on a regular basis. The amount depends on water hardness and household use.
  • Reverse osmosis filters and membranes. Pre-filters and membranes need scheduled changes.
  • UV lamps and sleeves. UV needs lamp replacement on a schedule set by the manufacturer.
  • Electricity and water waste. Pumps, UV units and reverse osmosis systems use power, and reverse osmosis discards some water.

Ask the installer for a written schedule and the expected yearly cost. Compare systems on that basis, not on the purchase price alone.

Ways to keep the budget reasonable

  • Start with the test results. Buy only the stages the results call for.
  • Install sediment first. A cheap sediment stage can extend the life of more expensive equipment.
  • Stage the purchase. Add a whole-house stage now and a drinking-water stage later if the budget is tight, as long as the order is correct.
  • Keep the drinking-water tap separate. A point-of-use reverse osmosis unit is often cheaper than whole-house reverse osmosis.

Questions to ask before you sign

  • Which contaminants does the system target, and what does the lab result say?
  • Is the equipment certified to the standard that matches each claim?
  • What is the expected yearly cost for filters, salt and service?
  • Does the quote include labor, permits, parts and a warranty?
  • Who services the system, and how quickly can they respond?

For the full treatment order and how each stage fits, see how to filter well and bore water for drinking. For sediment-specific options, see borewell mud and silt filters. If your water is also stained, iron filters for well water explains the main options.

The complete guide to well water

How to Filter Well and Bore Water for Drinking
Read the guide

Keep exploring

Guides from other topics

All topics →