The short answer
Boil it. Bring the water to a rolling boil, meaning bubbles that keep breaking even when you stir, and hold it there for one minute. At altitudes above about 6,500 feet (2,000 meters), hold it for three minutes. Let it cool, then store it in a clean, covered container.
Boiling kills the bacteria, viruses and parasites that cause most waterborne illness, which is why it is the first step when you don’t know whether water is safe. It does not remove chemicals, lead, nitrate or sediment.
Why boiling works, and what it doesn’t do
Heat destroys disease-causing microbes. Boiling does not remove anything that is dissolved in the water, so lead stays lead and nitrate stays nitrate after the water boils.
Boiling for longer than needed does not make water safer. As water evaporates, dissolved substances can become more concentrated. Once the water has reached a rolling boil, one minute (or three at altitude) is enough.
How to boil water safely
- If the water is cloudy or has visible sediment, let it settle, then pour off the clear water. You can also strain it through a clean cloth first.
- Bring the water to a rolling boil.
- Hold the boil for one minute, or three minutes above 6,500 feet.
- Let the water cool and store it in a clean, covered container.
- Refill the container regularly rather than letting old water sit.
When boiling isn’t enough
Boiling does not solve every water problem. Use a different approach if any of these apply:
- Chemicals. Lead, nitrate, arsenic, PFAS and pesticides are not removed by boiling. Test the water and use a filter certified for the specific contaminant.
- Sediment or cloudiness. Let the water settle or filter it before boiling, so the heat reaches everything.
- Unknown or changing supply. If a water utility issues a boil-water notice, follow it until the notice is lifted. Your utility or health department can tell you what applies to your address.
Bleach as a backup
Unscented household bleach that contains 6% to 8.25% sodium hypochlorite can disinfect water when you cannot boil. Check the label first, and never use scented or color-safe bleach.
Common public health guidance for clear water is about 8 drops of 6% bleach per gallon, or 6 drops of 8.25% bleach. Double the dose if the water is cloudy or cold. Stir, then wait 30 minutes. The water should have a faint chlorine smell. If it doesn’t, add a second dose and wait again.
Bleach has limits. It does not reliably inactivate Cryptosporidium, a parasite that resists chlorine. If parasites are a concern, boil instead. Bleach also does not remove chemicals. The dosing above is a general guide from public health sources, so confirm it against current guidance before you rely on it.
Filters at home: what to look for
Pitcher and faucet filters mostly improve taste and reduce chlorine. A filter does not disinfect water unless its certification says so. Look for a microbiological certification, such as NSF P231, on the product’s data sheet, and remember that it applies only to the specific product listed.
UV systems can inactivate many microbes, but they need clear water, electricity and regular maintenance. Like filters, they are not a substitute for knowing what is in your water.
Check your water first
- Public water. Your utility’s Consumer Confidence Report lists what it tested for and the results. It is the best starting point for deciding whether you need a filter, a boil plan or both.
- Well water. Test for bacteria, including E. coli and total coliform, and for nitrate. Ask your local health department or a certified lab how to collect a sample. Retest after floods, repairs, or any change in taste, color or smell.
Once you know what is in your water, you can match the method to the problem. For filter options, see the gravity water filter guide and the faucet filter guide. For a choice between bottled and filtered water, see bottled water or Brita filtered water.