Water Treatment Basics

How Water Distillation Works: The Principle Behind Home Distillers

Distillation boils water, collects the steam and condenses it, leaving most dissolved minerals and microbes behind. See how home units work and what they miss.

On this page
  1. The principle: boiling points
  2. The three steps
  3. What distillation removes
  4. Home distillers and stovetop methods
  5. Why distilled water tastes flat
  6. Speed, energy and cleaning
  7. Distillation compared with other options
  8. Bottom line

Distillation is one of the oldest ways to purify water. It works on a simple physical principle: boil water, collect the steam, and cool the steam back into liquid. What does not turn to steam stays in the boiling chamber. The result is water with very few dissolved minerals and salts, and with most microbes removed. It is also slow and uses energy, so it suits some uses better than others.

The principle: boiling points

Water boils at 100 °C (212 °F) at sea-level pressure. Most dissolved salts, minerals and metals have much higher boiling points, so they remain behind as water turns to vapour. Microbes do not vaporise in the same way, but the heat of boiling inactivates most of them, and they are left behind in the boiling chamber.

This is why distillation is effective for dissolved solids and many metals. It is also why it has limits. Some volatile chemicals have boiling points close to or below water’s, so they can travel with the steam and end up in the condensed water. That is the main reason many home distillers include a carbon post-filter.

The three steps

  1. Boil. Water is heated until it boils. Steam rises, and dissolved solids and most microbes stay in the chamber as residue.
  2. Condense. The steam travels through a tube or coil and is cooled, usually by a fan or cold water, until it turns back into liquid.
  3. Collect. The condensed water drips into a clean container. Many home units add a carbon filter at this stage to catch any volatile compounds that came over with the steam.

What distillation removes

Distillation removes most dissolved minerals, including calcium, magnesium and sodium, and most dissolved salts. It removes many heavy metals and most microbes. Fluoride is also largely removed. It is a broad process, but “most” is the right word. No single process removes every possible contaminant, and the carry-over of volatile chemicals is the reason to test the result if the water source is uncertain.

Home distillers and stovetop methods

Countertop distillers are the usual home option. They are self-contained, have a holding tank, and run for a set number of hours to make a batch. Their output is modest, often only a few litres a day, and they need electricity and regular cleaning because scale builds up in the boiling chamber.

Stovetop methods use two pots or a pot with a lid and a collecting vessel. They work, but they are slow and need close attention. The water can boil dry, and the apparatus can overheat. If you try a stovetop method, never leave it unattended, do not let the pot run dry, and handle hot lids and steam with care.

Why distilled water tastes flat

Distilled water tastes flat to many people because it has little dissolved mineral content. This is a taste difference, and it is not a sign that the water is harmful. Most people get the minerals they need from food. If you rely on distilled water for drinking every day and have questions about your mineral intake, ask your doctor or a dietitian.

Speed, energy and cleaning

Home distillers typically take hours to produce a gallon of water, depending on the model, so they are better suited to small amounts than to daily household use. They also use energy, and the boiling chamber needs cleaning to remove scale. Factor these into the decision alongside the purchase price.

Distillation compared with other options

Method Dissolved minerals Microbes Volatile chemicals Speed
Distillation Mostly removed Mostly removed Some can carry over unless a carbon stage is added Slow
Reverse osmosis Mostly removed Removed by the membrane Depends on carbon pre-filtration Moderate, with storage
Ultrafiltration Mostly kept Removed by the membrane Not removed by UF alone Fast
Carbon filter Mostly kept Generally not removed Reduced for many chemicals Fast

Choose the method that addresses your test results. Our article on types of home water filters sets out the options, and the article on ultrafiltration covers the membrane alternative. For fluoride specifically, see our article on removing fluoride from drinking water.

Bottom line

Distillation works by boiling and condensing water, and it leaves most dissolved minerals and microbes behind. It is a reliable method for those contaminants, but it is slow, uses energy, and can let some volatile chemicals through. For a small amount of drinking water, or for a specific need, a home distiller can be a reasonable choice. For a whole household, a filtration system is usually more practical. Our article on filtration versus purification explains how to think about the difference.

The complete guide to water treatment basics

Types of Home Water Filters and Treatment Systems Compared
Read the guide

Keep exploring

Guides from other topics

All topics →