Arsenic occurs naturally in some groundwater, and private wells are a common source of arsenic exposure in the United States. It can also come from some industrial sources. Public water systems are required to meet the federal limit of 10 parts per billion (ppb), but private wells are not covered by that rule. If you have a private well, testing is the first step, and the result tells you which kind of filter, if any, you need.
Arsenic comes in two inorganic forms that matter for filtration: arsenic III (arsenite) and arsenic V (arsenate). They behave differently in water, and a filter that works well on one may work less well on the other. Check which form your lab reports, and check the form covered by any filter you are considering.
Why the form matters
Arsenic V is usually charged in water, and many membrane and adsorption methods remove it well. Arsenic III is often uncharged at typical water pH, so it is harder for some methods to capture. Its removal depends more on the water chemistry and the system design. Oxidation before the filter can help some media, but that is a system design question, not a simple add-on.
In practice, this means you should not assume that a filter that works on “arsenic” works on both forms. Look for a claim that names arsenic III and arsenic V, under test conditions that match your water.
Test your well first
A lab test is the most useful step. Use a state-certified or accredited laboratory, and ask whether it reports total arsenic and, if possible, the species. Your state health department can give you a list of certified labs and advice on sampling.
Ask the lab to measure pH and, if relevant, iron, manganese and hardness as well. These affect how some filter media perform. Keep the report with the date and sample point, because you will need it when you compare filter claims.
Home test kits exist, but they are less reliable than a lab, and a total dissolved solids (TDS) meter does not measure arsenic at all. A TDS reading is not a test for arsenic.
Filter types that reduce arsenic
Reverse osmosis (RO). RO can remove arsenic, and it is generally more effective for arsenic V than arsenic III. It works best as a point-of-use unit at the kitchen tap, where it treats the drinking water. Check the RO model’s certification for the arsenic claim and test conditions. RO also produces waste water and needs a pre-filter to protect the membrane.
Activated alumina. Activated alumina is an adsorption medium that can reduce both arsenic forms in suitable designs. Its performance depends on pH, and many designs work best within a defined pH range. Ask for the pH range and the test basis before you buy.
Iron-based media. Iron-oxide or ferric-based media adsorb arsenic and are used in both point-of-use cartridges and whole-house tanks. They can need regular backwashing or media replacement, and some designs are sensitive to the water’s iron and manganese levels.
Arsenic-selective resin. Some anion exchange resins are designed for arsenic. They can be used in whole-house or point-of-use systems. Like other media, they need to be replaced when spent, and their capacity depends on the water chemistry.
Carbon filters that are sold for chlorine and taste are generally not designed for arsenic. Check the listing before relying on one.
Point of use or whole house
A point-of-use unit at the kitchen tap treats only the water you drink and cook with. It is usually cheaper and easier to install, and it is often enough when the goal is drinking water. A whole-house unit treats every tap, including the shower and laundry. It costs more, needs more space and plumbing work, and has larger replacement media.
Arsenic is mainly a drinking-water concern, so many households choose point-of-use treatment for the kitchen. Our article on whole-house filter downsides covers the trade-offs in more detail.
Check the certification claim
Certification is specific. Look for an arsenic claim under NSF/ANSI 53, and check that the claim covers both arsenic III and arsenic V, if you have both. Also check:
- The influent concentration and the effluent limit the test was measured against.
- The water chemistry used in the test, such as pH.
- The model, not just the brand. A cartridge certified in one housing may not be certified in another.
- The rated capacity or service life, in gallons or months.
Our article on NSF certifications explains how to read these claims.
Running costs
Arsenic filters need replacement media or cartridges, and the cost of those is the main running expense. Plan the replacement schedule against the rated capacity and your water use, not just the calendar. Test the water again after installation and periodically, because spent media stops working before it looks spent.
Spent arsenic media can contain concentrated arsenic. Follow the manufacturer’s instructions for handling and disposal, and check local rules before throwing it in the household trash.
What does not work
Boiling does not remove arsenic. Water loses volume as it boils, so the arsenic concentration goes up. Standard carbon filters, as sold for chlorine and taste, are generally not designed for arsenic. Pitcher filters are not a suitable arsenic solution.
Next steps for private well owners
- Test the well with a certified lab, including arsenic species and pH if possible.
- Compare the result with the federal limit of 10 ppb as a reference point, and talk to your health department about what the result means for your household.
- Choose a point-of-use or whole-house option that has a certified arsenic claim for your form of arsenic.
- Plan the replacement schedule and retest after installation.
If you are unsure what a test result means, ask your health department or a qualified water treatment professional. Our article on removing fluoride from drinking water covers another well-water concern, and the types of home water filters article gives an overview of the options.