Water Treatment Basics

How to Remove Chlorine From Tap Water at Home

Carbon filters remove chlorine well, but chloramine needs catalytic carbon or RO. Learn how to check which one your utility uses. Boiling is covered too.

On this page
  1. Check which disinfectant you have
  2. Carbon filters
  3. Catalytic carbon
  4. Reverse osmosis
  5. Boiling
  6. Off-gassing
  7. Showers and bathing
  8. Aquariums and brewing
  9. Choosing a method

Carbon filters are the most common way to remove chlorine from tap water at home, and they work well for chlorine taste and odour. Some utilities use chloramine, a compound of chlorine and ammonia, instead. Chloramine is harder to remove, and a standard carbon filter may not reduce it well. So the first step is to find out which disinfectant your utility uses. Then choose a method that handles that disinfectant.

Check which disinfectant you have

Your utility’s annual Consumer Confidence Report states the disinfectant it uses. That is the quickest way to find out. If you want to check the water yourself, a DPD test kit measures free chlorine and total chlorine. If the total is much higher than the free level, the water probably contains chloramine. Test strips are less precise but can give a rough reading.

Carbon filters

Activated carbon removes chlorine by adsorption. Granular activated carbon (GAC) and carbon block are the two common forms. Carbon block has a finer structure and more contact time, so it usually performs better for the same flow rate. Carbon is also the usual choice for taste and odour generally.

Look for NSF/ANSI 42 on the listing. That standard covers chlorine taste and odour reduction. It does not tell you whether a filter reduces chloramine, so check for a chloramine claim separately if your utility uses it.

Catalytic carbon

Catalytic carbon is a modified carbon with more active sites on its surface. It can break down chloramine more effectively than standard carbon, and it needs less contact time. If your utility uses chloramine, a filter that contains catalytic carbon, or is certified for chloramine reduction, is the one to look for.

Catalytic carbon is often combined with KDF, a copper-zinc media. KDF reduces free chlorine well and helps the carbon handle more chlorine. On its own, KDF removes only a limited amount of chloramine, so it is usually paired with catalytic carbon in systems meant for chloramine.

Reverse osmosis

RO removes chlorine and chloramine, though the membrane itself does not handle chlorine well. RO systems usually have a carbon pre-filter that removes chlorine before it reaches the membrane. RO produces drinking water with fewer dissolved contaminants, but it sends some water to drain and needs regular pre-filter changes.

Boiling

Boiling drives off free chlorine. A rolling boil for a few minutes reduces it noticeably, and a longer boil removes more. Boiling does not reliably remove chloramine. It also concentrates non-volatile substances left in the water, and it is not a practical daily method for drinking water.

Boiling is useful in an emergency or when you need a small amount of chlorine-free water. It does not replace a filter for everyday use.

Off-gassing

Free chlorine can evaporate from an open container left at room temperature. Most of it leaves within about 24 to 48 hours. Chloramine does not evaporate in a practical time, so this method does not work for chloramine. It is slow, and it is mainly used for water that is prepared in advance for aquariums or brewing.

Showers and bathing

Chlorine reaches the skin and the air as well as the drinking glass. Hot water releases volatile chlorine compounds into the bathroom air, and chlorine can dry the skin and hair. A shower filter is the usual solution for this. Choose one with a carbon stage certified for chlorine taste and odour, and check the listing for chloramine if your utility uses it. Replace the cartridge on schedule, because a spent shower filter stops working well.

Vitamin C (ascorbic acid) neutralises both chlorine and chloramine, and it is sometimes sold in shower and bath filters. It is a reasonable option for a bath, but it is not a practical method for large volumes of drinking water.

Aquariums and brewing

Chlorine and chloramine can harm fish and beneficial bacteria, and they can affect fermentation. For an aquarium, use a dechlorinator product made for fish, which is designed to neutralise both disinfectants. For brewing or fermentation, a carbon filter with a chloramine claim, a dechlorinating product or treatment with vitamin C are common options. Check the instructions for the specific product, and follow the guidance for the animal or process you are protecting.

Choosing a method

  • Taste at one tap: a carbon pitcher or faucet filter with an NSF/ANSI 42 claim. For chloramine, check for a chloramine claim or choose a different product.
  • Drinking and cooking, with chloramine: a certified under-sink carbon block with a chloramine claim, catalytic carbon, or RO.
  • Whole house: a carbon or catalytic carbon system sized for your flow, with a replacement schedule you can keep.
  • Showers: a shower filter with a carbon stage, replaced on schedule.

Our article on whether a home water filter removes chloramine goes into the chloramine question in more detail. For the basics of how each filter type works, see how drinking water filters work, and for NSF claims, see NSF certifications explained. Replacement timing is covered in how often to change a home water filter.

The complete guide to water treatment basics

Types of Home Water Filters and Treatment Systems Compared
Read the guide

Keep exploring

Guides from other topics

All topics →