Short answer: There is no single healthiest water filter. The right one removes the contaminants your water test shows, is certified to do so for the specific contaminant, and is one you can keep maintained. For lead, look for a product certified for lead reduction. For nitrate, fluoride, and dissolved salts, reverse osmosis (RO) is a common choice. For chlorine and taste, activated carbon works well. Start with a water test, because it tells you what you need to remove.
Start with your water, not a brand
Your starting point is what is in your water:
- Municipal water: your utility publishes an annual Consumer Confidence Report that lists the contaminants it has found and their levels.
- Private well: nobody monitors it for you, so test it. Test for bacteria, nitrate, and any contaminants common in your area.
- Older homes: lead can come from pipes and fixtures inside the home, which the utility report does not cover. A home test can help here.
A test shows what you need to remove. Without it, you are choosing a filter on guesswork.
Match the filter to the contaminant
Lead
Choose a filter that is certified for lead reduction. Several standards cover lead, and the most common is NSF/ANSI 53. Pitchers, faucet-mounted filters, under-sink carbon blocks, and RO systems can all be certified for lead, but each certification applies only to the specific model. Check the listing for the exact model you are buying.
Nitrate, fluoride, and dissolved salts
Carbon alone does not reliably reduce these. RO systems, certified to NSF/ANSI 58, can reduce nitrate and fluoride, depending on the system. Some other technologies, such as specialized media, may also be used for specific contaminants. Check the certification for the contaminant you need.
Chlorine, taste, and odor
Activated carbon is effective against chlorine and many of the compounds that affect taste and odor. Certifications for these effects are usually under NSF/ANSI 42. A carbon filter is a good choice if taste is your main concern and your water test shows no high levels of dissolved salts or other contaminants.
Microorganisms
No ordinary household filter should be relied on to make water microbially safe. If your water may contain bacteria, follow the advice of your local health authority, which may recommend boiling or disinfection. RO and carbon filters are not a substitute for disinfection when the water is known to be unsafe.
Hardness
Hardness is caused by calcium and magnesium, which most filters do not remove. A water softener is the tool for hardness. Our article on the healthiest water filtration system covers the whole-home picture.
Read the certifications
Certifications are the most useful way to compare products. They tell you which contaminants were tested and what the filter was tested to remove. Some common ones:
- NSF/ANSI 42: reduction of chlorine, taste, and odor, and some aesthetic effects.
- NSF/ANSI 53: reduction of health-related contaminants, which can include lead, certain volatile organic compounds, and cysts.
- NSF/ANSI 58: reverse osmosis systems.
- NSF/ANSI 401: some emerging contaminants, such as certain pharmaceuticals.
- NSF/ANSI 372: lead content of the filter’s components. This is about the materials of the product, not the contaminants it removes.
A certification covers only what is listed for that model. A product may be certified for lead and not for nitrate, or the reverse. The listing tells you which.
Choose the format that fits your home
- Pitchers and faucet filters are simple and low cost to start, but they are slow and have limited capacity. Compare the cost per gallon as well as the purchase price.
- Under-sink carbon filters deliver water at a dedicated faucet with little upkeep. They suit taste and chlorine concerns, and some are certified for lead.
- Under-sink RO systems can reduce a wider range of contaminants, with more maintenance and wastewater. Our pillar guide covers the trade-offs.
- Whole-house systems treat all the water in the home. They cost more and need installation, and they are the right tool when contaminants affect the whole house.
For the difference between a carbon filter and a carbon block, see our article on carbon block vs reverse osmosis. For the question of carbon versus charcoal, see is a carbon filter better than a charcoal filter.
Watch for overstated claims
Be careful with product marketing that says a filter removes “100%” of contaminants or is “the healthiest.” Some reviews test a single water supply, so their results may not apply to your water. Look for independent certification for the contaminant you care about, and check the replacement cost per gallon. A filter that is well certified but not maintained will not protect you.
If you have infants, check the water for nitrate and bacteria before you use it for formula. See our article on RO water and baby formula.
Keep the sediment prefilter current in any RO system, because a clogged prefilter reduces performance. See the sediment prefilter guide.